QUOTATION

Please fill in the below fields to generate an on-screen quotation for your worktops. This information is not sent to Precious Marble Ltd unless you choose to submit your quotation to us at the end, which will allow us to contact you to answer any questions you may have.  Please note that all colours/brands offered are not on our quotation form. However please feel free to contact us for quotes on colours or brands that you are looking for.

    Choose your material

    Cashmere White

    Carrara Spring

    Calacatta

    Calacatta Dorado

    Statuario Extra

    White Glitter

    Grey Glitter

    Grey Rust

    Kasha

    Copper Rust

    Snowdon

    Nero Marquina

    Black Glitter

    Bayside

    Carrara Glacier

    Calacatta Panda

    Concreto Dark

    Statuario Gold

    Amigo Concrete

    Alaska

    Cala Blue

    Posidonia Green

    Arcilla Red

    Trilium

    Laurent

    Kelya

    Domoos

    Orix

    Vera

    Kovik

    Kairos

    Rem

    Nilium

    Olimpo X-Gloss

    Tundra X-Gloss

    Bergen X-Gloss

    Arga X-Gloss

    Select your kitchen layout

    Worktop Layout

    Choose one of the layouts that matches your kitchen closest.

    If no layout works for your kitchen layout, choose the “Custom sizes” option.

    Sizes for each piece What are the sizes for each piece? Please enter the measurements in mm (millimetres) for each worktop piece. You must enter a length and width for each piece. Take a tape measure to measure the required pieces.

    Width (mm)
    Width (mm)
    Width (mm)
    m2
    Note: calculations under 3m2 - please call for a more accurate price.

    Sizes for each piece

    Width (mm)
    Width (mm)
    m2
    Note: calculations under 3m2 - please call for a more accurate price.

    Sizes for each piece

    Width (mm)
    Width (mm)
    m2
    Note: calculations under 3m2 - please call for a more accurate price.

    Sizes for each piece

    Width (mm)
    Width (mm)
    Width (mm)
    m2
    Note: calculations under 3m2 - please call for a more accurate price.

    Sizes for each piece

    Width (mm)
    Width (mm)
    Width (mm)
    Width (mm)
    m2
    Note: calculations under 3m2 - please call for a more accurate price.

    Sizes for each piece

    Width (mm)
    Width (mm)
    m2
    Note: calculations under 3m2 - please call for a more accurate price.

    Sizes for each piece

    Width (mm)
    Width (mm)
    Width (mm)
    m2
    Note: calculations under 3m2 - please call for a more accurate price.

    Sizes for each piece

    Width (mm)
    Width (mm)
    Width (mm)
    Width (mm)
    Add another piece?

    Width (mm)
    Add another piece?


    Width (mm)

    m2
    Note: calculations under 3m2 - please call for a more accurate price.

    Will any of your worktops have a breakfast bar? A seating area with an overhang of up to 300mm in depth.

    Choose Your Cut Outs

    Polished Sink Cut Outs A polished cut out is used for under-mounted sinks and will be visible once the sink is in place. This is therefore cut to the size of the sink and the edge is polished.


    Standard Hob Cut Out Hobs that sit on the worktop require a cutout in the worktop surface.


    Unpolished Sink Cut Outs An unpolished cut out is typically used for a hob or an over-mounted sink and won't be visible once these are in place.


    Tap hole Taps will require a hole to be cut into the stone to allow for the plumbing. This is always required alongside an undermounted or Butler sink


    Set of Drainer grooves (5) A set of 5 drainer grooves often accompany undermouted sinks. They are polished into the stone to provide water drainage, while presenting a beautiful finish.


    Recessed Drainer board A recessed drainer can accompany undermouted sinks. They are polished into the stone to provide water drainage, while presenting a beautiful finish. If drainer grooves are also required to be added to the recessed drainer board, you will need to select both options on the form.


    Socket Cut Outs / Pop-up plug Cut Outs On a worktop, this allows for pop-up plugs. On a splashback, this allows for plug sockets.


    Radius (rounded corners) Corners can be rounded off in a curve for aesthetic and practical purposes.


    Choose your Polished Edge Detail A chamfer is a polished edge adjoining two right-angled faces.
    A pencil round edge is one that has been slightly rounded off at the top.

    Please advise the Linear Metres of Polished Edges Required:

    Please advise the Linear Metres of Polished Edges Required:

    Do you require Upstands? An upstand is a border above the worktop and against the wall, following the length of the worktop. It acts to protect the wall from splashes, as well as providing a nice finish. This is typically 100mm high.

    Please enter the linear metre measurement.

    Do you require Splashbacks? Where you have splashbacks across an entire wall, you will probably also have plug sockets or light switches, for which holes will need cutting in the stone.

    What are the sizes for each piece in millimetres?
    Piece A Length (mm) Width (mm)

    Please enter your postcode

    Enter the first letters of your postcode:

    Templating and fitting cost:

    Here is your estimated Quotation

    All prices are an estimate based on the information you have provided and is subject to templating. For a more accurate quotation, please feel free to contact the team at Precious Marble Ltd who will be happy to advise.

    Submit your quote

    Please feel free to submit your quote to the team at Precious Marble Ltd if you are interested in being contacted about your quote

    When will your kitchen be ready for templating?

    Are you interested in 0% Interest Credit?